Dual 90 channel multiplexer reliability prediction and failure mode, effects & criticality analysis

This ATM documents the Reliability Prediction and Failure Modes and Effects analysis of the Bendix de signed Dual 90 Channel Multiplexer. The analysis reflects the final flight configuration for the A2 ALSEP system.prepared by John Mansour

Role of Gypsum Content on the Long-Term Performance of Lime-Stabilised Soil

The role of gypsum level on the long-term strength and expansion of soil stabilised with different lime contents is not well understood. This research, therefore, studied the effect of varying gypsum concentrations of 0, 3, 6, and 9 wt% (equivalent to the sulfate contents of 0, 1.4, 2.8, and 4.2%, respectively) on the performance of sulfate soil stabilised with two lime levels (4 and 6 wt%). This was carried out to establish the threshold level of gypsum/lime (G/L) at which the increase in G/L ratio does not affect the performance of lime-stabilised sulfate soil. Both unconfined compressive strength (UCS) and expansion, along with the derivative thermogravimetric (DTG) analysis, were adopted to accomplish the present objective. Accordingly, the result indicated that the strength and expansion were proportional to the lime and sulfate content, of which a G/L ratio of 1.5 was the optimum case scenario for UCS, and at the same time, the worst-case scenario for expansion. This discovery is vital, as it is anticipated to serve as a benchmark for future research related to the design of effective binders for suppressing the sulfate-induced expansion in lime-stabilised gypseous soil

Intraduodenal sarcoma recurrence of retroperitoneal origin: an unusual cause for a duodenal obstruction.

Soft tissue sarcomas are uncommon tumors, and intraduodenal soft tissue sarcoma manifestation is even more rare. Only three cases of intraduodenal sarcomas have been reported in the literature thus far. Here, we report a case of an intraduodenal recurrence of a retroperitoneal sarcoma causing bowel obstruction. This unusual recurrence pattern likely relates to the patient's previous resection and radiation treatment, and highlights the benefits, limitations and follow-up strategies after multimodality treatment

Investigation of Flight II Central Station overvoltage condition

The purpose of this ATM is to document the results of the Reliability/Engineering investigation of the overvoltage condition that occurred while performing the Flight II Central Station power dissipation test. The objective was to assess the flight worthiness of the C/S components and to identify any overstressed piece parts.prepared by J. Mansour

Microscale Analysis of Spacecraft Heat Shields

Imagine entering Earths atmosphere after returning from the outer solar system. A heat shield less than 2 inches thick protects you from temperatures up to 2,900 Celsius (5,252 Fahrenheit). Such conditions were experienced by NASAs Stardust capsule during reentry in 2006. The only materials capable of providing the necessary protection are composites with complex microstructures. Evaluating these materials is difficult, requiring precise knowledge of their properties. To this end, NASA scientists are developing research codes to compute material properties and simulate ablation at the microscale using agency supercomputers. Utilizing these tools, along with experiments, researchers are working to push the limits of spaceflight, allowing for greater flexibility in future space missions

A normal stress subgrid-scale eddy viscosity model in large eddy simulation

The Smagorinsky subgrid-scale eddy viscosity model (SGS-EVM) is commonly used in large eddy simulations (LES) to represent the effects of the unresolved scales on the resolved scales. This model is known to be limited because its constant must be optimized in different flows, and it must be modified with a damping function to account for near-wall effects. The recent dynamic model is designed to overcome these limitations but is compositionally intensive as compared to the traditional SGS-EVM. In a recent study using direct numerical simulation data, Horiuti has shown that these drawbacks are due mainly to the use of an improper velocity scale in the SGS-EVM. He also proposed the use of the subgrid-scale normal stress as a new velocity scale that was inspired by a high-order anisotropic representation model. The testing of Horiuti, however, was conducted using DNS data from a low Reynolds number channel flow simulation. It was felt that further testing at higher Reynolds numbers and also using different flows (other than wall-bounded shear flows) were necessary steps needed to establish the validity of the new model. This is the primary motivation of the present study. The objective is to test the new model using DNS databases of high Reynolds number channel and fully developed turbulent mixing layer flows. The use of both channel (wall-bounded) and mixing layer flows is important for the development of accurate LES models because these two flows encompass many characteristic features of complex turbulent flows